Creating a Shared Load Balancer

Scenarios

Notes and Constraints

• After a load balancer is created, the VPC cannot be changed. If you want to change the VPC, create a shared load balancer and select a different VPC.
• To ping the IP address of a shared load balancer, you need to add a listener and associate a backend server to it.

Procedure

1. Log in to the management console.
2. In the upper left corner of the page, click and select the desired region and project.
3. Click in the upper left corner to display Service List and choose Network > Elastic Load Balance.
4. On the Load Balancers page, click Create Elastic Load Balancer. Configure the parameters based on Table 1.

   Table 1 Parameters for configuring the basic information

   Parameter	Description
   Type	Specifies the type of the load balancer. The type cannot be changed after the load balancer is created.
   Region	Specifies the desired region. Resources in different regions cannot communicate with each other over internal networks. For lower network latency and quicker resource access, select the nearest region.
   Name	Specifies the name of the shared load balancer.
   Enterprise Project	Specifies an enterprise project by which cloud resources and members are centrally managed.
   Description	Provides supplementary information about the load balancer.
   Tag	Identifies load balancers so that they can be easily found. A tag consists of a tag key and a tag value. The tag key marks a tag, and the tag value specifies specific tag content. For details about the naming rules, see Table 2. A maximum of 10 tags can be added.

   Table 2 Tag naming rules

   Parameter	Rule
   Tag key	Cannot be empty. Must be unique for the same load balancer. Can contain a maximum of 36 characters. Can contain only letters, digits, underscores (_), hyphens (-), at signs (@).
   Tag value	Can contain a maximum of 43 characters. Can contain only letters, digits, underscores (_), hyphens (-), at signs (@).

5. Configure the network parameters based on Table 3.

   Table 3 Parameters for network configurations

   Parameter	Description
   Network Type	Specifies the network type of a load balancer. Public IPv4 network: The load balancer routes IPv4 requests from the clients to backend servers over the Internet. Private IPv4 network: The load balancer routes IPv4 requests from the clients to backend servers in the same VPC as the load balancer.
   VPC	Specifies the VPC where the shared load balancer will work. You cannot change the VPC after the load balancer is created. Plan the VPC as required. Select an existing VPC or create a new one. For more information about VPC, see the Virtual Private Cloud User Guide.
   Frontend Subnet	Specifies the subnet where the load balancer will work. Shared load balancers support private IPv4 network by default. The system assigns IPv4 private addresses in this subnet to load balancers.
   IPv4 Address	Specifies how you want the IPv4 address to be assigned. Automatically assign IP address: The system automatically assigns an IPv4 address to the load balancer. Manually specify IP address: You need to manually specify an IPv4 address to the load balancer. NOTE: Network ACL rules configured for the frontend subnet of a load balancer do not restrict traffic from clients to the load balancer. Use access control to limit which IP addresses can access the load balancer. For details, see What Is Access Control?
   EIP	Specifies the public IP address that will be bound to the load balancer for receiving and forwarding requests over the Internet. You can use an existing EIP or assign a new one. The following options are available: New EIP: The system will automatically assign an EIP. Use existing: Select an existing EIP.
   EIP Type	Specifies the link type (BGP) when a new EIP is used.
   Billed By	Specifies how the bandwidth will be billed. Bandwidth: You specify the maximum bandwidth and pay for the amount of time you use the bandwidth. Traffic: You specify a maximum bandwidth and pay for the outbound traffic you use. Shared Bandwidth: Only the shared bandwidth will be billed. There will be no additional bandwidth or traffic costs for EIPs added to the shared bandwidth.
   Bandwidth	Specifies the maximum bandwidth when a new EIP is used, in Mbit/s.

6. Click Create Now.