Querying Supplementary Network Interfaces

Function

This API is used to query supplementary network interfaces. A maximum of 2,000 records are returned for each query.

URI

GET /v3/{project_id}/vpc/sub-network-interfaces

Table 1 Path Parameters
Parameter	Mandatory	Type	Description
project_id	Yes	String	Project ID. For details about how to obtain a project ID, see Obtaining a Project ID.

Table 2 Query Parameters
Parameter	Mandatory	Type	Description
limit	No	Integer	Number of records returned on each page. Value range: 0 to 2000.
marker	No	String	Start resource ID of pagination query. If the parameter is left blank, only resources on the first page are queried.
id	No	Array of strings	ID of the supplementary network interface. Multiple IDs can be specified for filtering. This parameter is used to query supplementary network interfaces.
description	No	Array of strings	Description about the supplementary network interface. Multiple descriptions can be specified for filtering. This parameter is used to filter supplementary network interfaces by description.
vpc_id	No	Array of strings	VPC ID of the supplementary network interface. Multiple IDs can be specified for filtering. This parameter is used to query supplementary network interfaces in one or more VPCs.
virsubnet_id	No	Array of strings	Virtual subnet ID of the supplementary network interface. Multiple IDs can be specified for filtering. This parameter is used to query supplementary network interfaces in one or more virtual subnets.
parent_id	No	Array of strings	ID of the elastic network interface that the supplementary network interface is attached to. Multiple IDs can be specified for filtering. This parameter is used to filter supplementary network interfaces of one or more elastic network interfaces.
private_ip_address	No	Array of strings	Private IPv4 address of the supplementary network interface. Multiple private IPv4 addresses can be specified for filtering. This parameter is used to filter supplementary network interfaces using one or more private IPv4 addresses.
mac_address	No	Array of strings	MAC address of the supplementary network interface. Multiple MAC addresses can be specified for filtering. This parameter is used to filter supplementary network interfaces.
enable_ip	No	Boolean	Whether an EIP is bound. This parameter is used to filter supplementary network interfaces based on whether an EIP is bound.
scope	No	String	Network border group that is used to filter supplementary network interfaces.
security_groups	No	String	ID of the security group associated with the supplementary network interfaces. Multiple IDs can be specified for filtering.

Request Parameters

None

Response Parameters

Status code: 200

Table 3 Response body parameters
Parameter	Type	Description
request_id	String	Request ID. The value must be in standard UUID format.
sub_network_interfaces	Array of SubNetworkInterface objects	Supplementary network interfaces.
page_info	PageInfo object	Pagination information.

Table 4 SubNetworkInterface
Parameter	Type	Description
id	String	Supplementary network interface ID, which uniquely identifies the supplementary network interface. The value is in UUID format with hyphens (-).
virsubnet_id	String	ID of the virtual subnet. The value must be in standard UUID format.
private_ip_address	String	Private IPv4 address of the supplementary network interface. The value must be within the virtual subnet. If this parameter is left blank, an IP address will be randomly assigned.
ipv6_ip_address	String	IPv6 address of the supplementary network interface.
mac_address	String	MAC address of the supplementary network interface. The value is a valid MAC address assigned by the system randomly.
parent_device_id	String	Device ID. The value must be in standard UUID format.
parent_id	String	ID of the elastic network interface. The value must be in standard UUID format.
description	String	Description about the supplementary network interface. The value can contain up to 255 characters and cannot contain angle brackets (< or >).
vpc_id	String	VPC ID of the supplementary network interface. The value must be in standard UUID format.
vlan_id	Integer	VLAN ID of the supplementary network interface. The value ranges from 1 to 4094. Each supplementary network interface has a unique VLAN ID.
security_groups	Array of strings	Security group IDs, for example, "security_groups": ["a0608cbf-d047-4f54-8b28-cd7b59853fff"]. The default value is the default security group.
tags	Array of ResourceTag objects	Tags of the supplementary network interface.
project_id	String	Project ID of the supplementary network interface.
created_at	String	Time when the supplementary network interface was created. The value is a UTC time in the format of yyyy-MM-ddTHH:mm:ssZ.
allowed_address_pairs	Array of AllowAddressPair objects	IP address and MAC address pairs. For details, see the AllowAddressPair table. Note: The IP address cannot be 0.0.0.0. Configure a dedicated security group for the port if allowed_address_pairs has a CIDR block with a netmask length less than 24. ip_address cannot be set to a CIDR block in a hardware SDN environment.
state	String	Status of the supplementary network interface.
instance_id	String	ID of the instance that is attached to the supplementary network interface, for example, the RDS instance ID.
instance_type	String	Type of the instance that is attached to the supplementary network interface, for example, an RDS instance.
scope	String	Public network egress information of the site where the supplementary network interface works.
security_enabled	Boolean	Whether the security option is enabled for the supplementary network interface. If the option is not enabled, the security group does not take effect.

Table 5 ResourceTag
Parameter	Type	Description
key	String	Tag key Tag keys must be unique for each resource. Minimum: 1 Maximum: 128
value	String	Tag value. Maximum: 255

Table 6 AllowAddressPair
Parameter	Type	Description
ip_address	String	IP address. You cannot set it to 0.0.0.0. Configure a dedicated security group for the port if allowed_address_pairs has a CIDR block with a netmask length less than 24.
mac_address	String	MAC address.

Table 7 PageInfo
Parameter	Type	Description
previous_marker	String	First record on the current page.
current_count	Integer	Total number of records on the current page.
next_marker	String	Last record on the current page. This parameter does not exist if the page is the last one.

Example Requests

Querying supplementary network interfaces by its ID.

GET https://{Endpoint}/v3/8c6fb137a48a428aaf9a0229dca4edb3/vpc/sub-network-interfaces?id=022b5c53-20e1-4f4b-b90c-0575a5e97412&id=056d6cb4-b436-460d-9a63-67666bf3ea9c

Querying supplementary network interfaces by combined filters.

https://{Endpoint}/v3/8c6fb137a48a428aaf9a0229dca4edb3/vpc/sub-network-interfaces?virsubnet_id=3eae2c96-de45-4c41-bf2d-e4ad53a2acb4&private_ip_address=192.168.22.177&parent_id=5eb9dc59-8159-4197-88ea-f3507ad8e0a7

Querying supplementary network interfaces by page.

GET https://{Endpoint}/v3/8c6fb137a48a428aaf9a0229dca4edb3/vpc/sub-network-interfaces?limit=2

Example Responses

Status code: 200

Normal response to the GET operation. For more status codes, see Status Codes.

{
  "request_id" : "e4cb9e3a-7b99-41c9-afd8-1630fe313299",
  "sub_network_interfaces" : [ {
    "id" : "2be868f2-f7c9-48db-abc0-eea0b9105b0d",
    "project_id" : "8c6fb137a48a428aaf9a0229dca4edb3",
    "virsubnet_id" : "08278e6c-61ca-46c1-9fc3-0d4f6c12f193",
    "private_ip_address" : "10.0.0.225",
    "mac_address" : "fa:16:3e:48:f8:6f",
    "parent_device_id" : "1ab01f1d-4ef7-4d83-82be-802b3aca0223",
    "security_groups" : [ "6727c950-9f01-47a2-a7aa-7d3686c4c95b" ],
    "allowed_address_pairs" : [ ],
    "vpc_id" : "63b97e6b-3598-430f-9eb8-1caf06937be8",
    "parent_id" : "637748df-2986-4350-8303-95d259580fb3",
    "vlan_id" : 2787,
    "instance_type" : "",
    "instance_id" : "",
    "tags" : [ ],
    "created_at" : "2020-05-19T01:16:25.000+00:00"
  }, {
    "id" : "55761e2d-8f72-42c0-9874-98e9885bf0fe",
    "project_id" : "8c6fb137a48a428aaf9a0229dca4edb3",
    "virsubnet_id" : "08278e6c-61ca-46c1-9fc3-0d4f6c12f193",
    "private_ip_address" : "10.0.3.55",
    "mac_address" : "fa:16:3e:c2:2c:ba",
    "parent_device_id" : "1ab01f1d-4ef7-4d83-82be-802b3aca0223",
    "security_groups" : [ "6727c950-9f01-47a2-a7aa-7d3686c4c95b" ],
    "allowed_address_pairs" : [ ],
    "vpc_id" : "63b97e6b-3598-430f-9eb8-1caf06937be8",
    "parent_id" : "637748df-2986-4350-8303-95d259580fb3",
    "vlan_id" : 799,
    "instance_type" : "",
    "instance_id" : "",
    "tags" : [ ],
    "created_at" : "2020-05-19T01:16:31.000+00:00"
  } ],
  "page_info" : {
    "next_marker" : "55761e2d-8f72-42c0-9874-98e9885bf0fe",
    "previous_marker" : "2be868f2-f7c9-48db-abc0-eea0b9105b0d",
    "current_count" : 2
  }
}

Status Codes

Status Code	Description
200	Normal response to the GET operation. For more status codes, see Status Codes.

Error Codes

See Error Codes.

Parent topic: Supplementary Network Interface

Предыдущая статья

Creating Supplementary Network Interfaces in Batches

Следующая статья

Querying the Details of a Supplementary Network Interface

Была ли эта статья полезна?

Поддержка Юридические документы