Configuring a Default WORM Policy for a Bucket

Functions

This operation allows you to configure the default WORM policy and a retention period for a bucket.

With the bucket's default WORM policy, if you do not specify a WORM policy or a retention period when you upload an object to the bucket, the default policy will be automatically applied to the newly uploaded object. An object-level WORM policy requires configuring a specific date, which indicates an object will be protected until that date. For a default bucket-level WORM policy, a retention period is required, and the protection for an object starts when the object is uploaded to the bucket.

To perform this operation, you must have the PutBucketObjectLockConfiguration permission. The bucket owner can perform this operation by default and can grant this permission to others by using a bucket policy or a user policy.

Note

You can modify or even delete the default WORM policy of a bucket. The change applies only to the objects uploaded after the change, but not to those uploaded before.
During a multipart upload, the object parts uploaded are not protected before they are assembled. After object parts are assembled, the new object is protected by the default bucket-level WORM policy. You can also configure an object-level WORM policy for the new object.

Other restrictions on the WORM retention configuration:

The WORM mode can only be COMPLIANCE.
The retention period can be set to 1 to 36500 days or 1 to 100 years.

Request Syntax

PUT /?object-lock HTTP/1.1
Host: bucketname.obs.region.example.com
Date: date
Authorization: authorization
Content-Type: application/xml
Content-Length: length
<ObjectLockConfiguration xmlns="http://obs.region.example.com/doc/2015-06-30/">
    <ObjectLockEnabled>Enabled</ObjectLockEnabled>
    <Rule>
       <DefaultRetention>
          <Days>integer</Days>
          <Mode>COMPLIANCE</Mode>
          <Years>integer</Years>
       </DefaultRetention>
    </Rule>
</ObjectLockConfiguration>

Request Parameters

This request contains no message parameters.

Request Headers

This request uses common headers. For details, see Table 3.

Request Elements

Table 1 Request elements
Element	Description	Mandatory
ObjectLockConfiguration	Container for configuring WORM for a bucket. Type: container	Yes
ObjectLockEnabled	Indicates whether the bucket has WORM enabled. The value can only be Enabled. Type: string Example: Enabled	No
Rule	Rule container for the default bucket-level WORM policy. Type: container	This header is mandatory for configuring the default WORM policy for a bucket. If it is not contained, the existing default WORM policy will be deleted.
DefaultRetention	Container for the default WORM retention policy for the bucket. Type: container	Mandatory if the Rule container is included.
Mode	Default protection mode. It can only be set to COMPLIANCE now. Type: string Example: COMPLIANCE	Mandatory if the DefaultRetention container is included.
Days	Default protection period, in days. The value is from 1 to 36500. Type: integer Example: 1	If the DefaultRetention container is included, you must specify either Days or Years, but you cannot specify both at the same time.
Years	Default protection period, in years. The value is from 1 to 100. In a leap year, only 365 days are calculated. Type: integer Example: 1	If the DefaultRetention container is included, you must specify either Years or Days, but you cannot specify both at the same time.

Response Syntax

HTTP/1.1 status_code
Date: date
Content-Length: length

Response Headers

This response uses common headers. For details, see Table 1.

Response Elements

This response contains no elements.

Error Responses

Table 2 describes possible special errors in this request.

Table 2
Error Code	Description	HTTP Status Code
InvalidRequest	The object lock is disabled for the bucket.	400
MalformedXML	Invalid format of the Object Lock configuration.	400

For other errors, see Table 2.

Sample Request 1

Configure the default bucket-level WORM policy with a retention period of 2 years.

PUT /?object-lock HTTP/1.1
Host: bucketname.obs.region.example.com
Date: WED, 01 Jul 2015 02:25:05 GMT
Authorization: OBS H4IPJX0TQTHTHEBQQCEC:75/Y4Ng1izvzc1nTGxpMXTE6ynw=
Content-Type: application/xml
Content-Length: 157
<ObjectLockConfiguration xmlns="http://obs.region.example.com/doc/2015-06-30/">
    <ObjectLockEnabled>Enabled</ObjectLockEnabled>
    <Rule>
       <DefaultRetention>
          <Mode>COMPLIANCE</Mode>
          <Years>2</Years>
       </DefaultRetention>
    </Rule>
</ObjectLockConfiguration>

Sample Response 1

HTTP/1.1 200 OK
Server: OBS
x-obs-request-id: BF260000016435CE298386946AE4C482
x-obs-id-2: 32AAAQAAEAABSAAgAAEAABAAAQAAEAABCT9W2tcvLmMJ+plfdopaD62S0npbaRUz
Date: WED, 01 Jul 2015 02:25:06 GMT
Content-Length: 0

Sample Request 2

Delete the configuration of the default bucket-level WORM policy.

PUT /?object-lock HTTP/1.1
Host: bucketname.obs.region.example.com
Date: WED, 01 Jul 2015 02:25:05 GMT
Authorization: OBS H4IPJX0TQTHTHEBQQCEC:75/Y4Ng1izvzc1nTGxpMXTE6ynw=
Content-Type: application/xml
Content-Length: 157
<ObjectLockConfiguration xmlns="http://obs.region.example.com/doc/2015-06-30/">
</ObjectLockConfiguration>

Sample Response 2

HTTP/1.1 200 OK
Server: OBS
x-obs-request-id: BF260000016435CE298386946AE4C482
x-obs-id-2: 32AAAQAAEAABSAAgAAEAABAAAQAAEAABCT9W2tcvLmMJ+plfdopaD62S0npbaRUz
Date: WED, 01 Jul 2015 02:25:06 GMT
Content-Length: 0

Parent topic: Advanced Bucket Settings

Предыдущая статья

Deleting the Encryption Configuration of a Bucket

Следующая статья

Obtaining the Default WORM Policy of a Bucket

Была ли эта статья полезна?

Поддержка Юридические документы